Jaw crusher|Cone crusher|Sand maker|Hammer crusher|Vibrating screen
Current Location:Home-Ore dressing machine - Flotation Cell
Flotation Cell
Flotation CellFlotation Cell Pdf Download
Flotation machine is applicable for the separation of nonferrous metal and ferrous metal. It is also used for separating nonmetal, such as fluorite and talcum.


Get Quote          Get More Help

The application of flotation cell is very wide, and according to the actual industrial needs of different ore beneficiation processes for the flotation separation technology, and through constant technical improvement and innovation, the application cell flotation has been greatly improved. The application of flotation cell technology has an important role in promoting the flotation separation efficiency, but the operation technology of cell flotation machine is one of the important factors influencing the working efficiency of flotation separator.

Characteristics Of Flotation Cell

1.Large inspiratory capacity and low power consumption. 

2.Each cell of the flotation cell has triple functions of inspiratory, midge and flotation, forming flotation circuit by its own, without any auxiliary equipment. Horizontal configuration, easy to change the process. 

3.Slurry circulates reasonably, which can minimize grit sedimentation. 

4.Slutty surface has self-control device, and easy to adjust. 

5.Impeller is with backward curved upper and lower blades. The upper blade produces upper pulp cycle, and the lower blade produces the lower pulp cycle. 

Working Principle Of Flotation Separator

When flotation separator works, slurry is inhaled from the bottom of the trough to the space between impellers. Meanwhile, the low pressure air send by fan is sent to this area through the air distributor in the hollow shaft. After sufficient mixing, the slurry is pushed out by the impeller, and then goes to the whole trough. When the froth rises to the stable level, after the processing, froth overflows to the froth trough from the overflow weir. Another part of ore slurry flows to lower part of impeller for the remixing with air. The remained slurry flows to the next trough until it becomes residue.

To send inquiries, including feedback, requests for information, or questions, you may use our Feedback and Inquiries form below.

Fields marked by an asterisk (*) are required fields.

Topic: *
Company Name:
Name: *
Tel: *
E-mail: *
Message: *
      
Relevant reports
Hot Products
  • Wet Type Rod MillWet Type Rod Mill
    Rod mill is named according to the steel bar inside the loading grinding barrel and there are dry type and wet type rod ...
  • Dry Magnetic SeparatorDry Magnetic Separator
    Dry magnetic separator is the mainstream strong magnet separator which is widely used for processing dry magnetic minera...
  • Concentrator TableConcentrator Table
    Concentrator table, which is also named as shaking concentrator, is an ore dressing machine for fine materials, which wo...
Latest News
Tel TEL: +86-371-67833171
Email E-mail: sinohxjq@hxjq.com
Yahoo Yahoo: hxjqchina@yahoo.com
Msn MSN:hxjq@hxjq.com