Raymond Pulverizer
The raymond mill produced by Hongxing Machinery adopts advanced structure of the same products in the domestic and foreign market and is upgraded and improved on the basis of traditional Raymond mill in the same industry.
The raymond mill produced by Hongxing Machinery adopts advanced structure of the same products in the domestic and foreign market and is upgraded and improved on the basis of traditional Raymond mill in the same industry.
The raymond mill produced by Hongxing Machinery adopts advanced structure of the same products in the domestic and foreign market and is upgraded and improved on the basis of traditional Raymond mill in the same industry. Compared with ball mill, this equipment has higher efficiency, low electricity consumption, small floor space and small one-time investment. The grinding roll tightly presses on the grinding ring under centrifugal force; for this reason, when the grinding roll and the grinding ring are abraded, the output and the fineness of the final products are not influenced. The changing cycle of the grinding roll and the grinding ring is long. The air separation flow of this machine cyclically flows inside the air blower, mill case, cyclone separator and air blower, so that compared with high-speed centrifugal crusher, this machine has little powder dust and the operational workshop is clean.
Raymond mill consists of the host, analyzer, blower, cyclone separator, micro powder cyclone separator and air hose. Moreover, the host consists of rack, diffuser, shovel knife, grinding roll, grinding ring and housing.
Hongxing raymond mill is widely used in ultrafine powder processing of barite, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, heat insulator and other non-flammable and non-explosive materials that Mok's hardness is not more than 9.3 and humidity below 6%. The particle size of finished product can be adjusted from 80 to 325 meshes at random and the particle size of part materials can reach 2000 meshes at the maximum.
1. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.
2. The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system.
3.The electric control system is centralized control, so the automaticity is high, no people is needed in the operating room.
4. Main parts of the whole plant are made from cast and steel with high quality. The technics is so subtly that ensures the durability of whole plant.
5. Compared with other milling plants, its passing ratio achieves 99%, which is what other mill can not reach.
After the materials are ground, the host will inhale the wind into the cabinet inside the host for blowing powder. The powder is separated by the analyzer above the grinding chamber, with the over-thick materials being crushed again in the grinding chamber and the qualified materials getting into the cyclone collector following the wind. After collected, the materials are discharged by the powder discharge port as finished products.
| Model | 4525 | 4119 |
| Feeding Size(mm) | ≤30 | ≤25 |
| Output Size(mm) | 0.173-0.044 | 0.173-0.044 |
| Shift Output of Different Material Fineness(t) | 16-176 | 8-78 |
| Rotation Speed of Central Shaft(r/min) | 82 | 105 |
| Ring Diameter(mm) | 1770 | 1400 |
| Roller Diameter(mm) | 450 | 410 |
| Roller Height(mm) | 250 | 190 |
| Main Motor(kw) | Y315M-4-132 | Y280S-4-75 |
| Fan Motor | Y315M-4-132 | Y280S-4-75 |
| Analyzer Motor | YCT250-4A-18.5 | YCT200-4B-7.5 |
